vishay semiconductors VLMW41....-.... document number 82411 rev. 1.1, 01-aug-11 www.vishay.com 1 for technical support, please contact: led@vishay.com this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 standard smd led plcc-2 features ? high efficient ingan technology ? very narrow chromaticity coordinate group categorization according to cie1931 per packing unit ? typical color temperature 5500 k ? eia and ice standard package ? compatible with reflow, vapor phase and wave solder processes acc. to cecc 00802 and j-std-020 ? available in 8 mm tape reel ? preconditioning: acco rding to jedec level 2a ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec ? aec-q101 qualified 19225 description this device has been designed to meet the increasing demand for white smd led. the package of the VLMW41.. is the plcc-2. it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled with a mixture of epoxy and tag phosphor. the tag phosphor converts the blue emission partially to yellow, which mixes with the remaining blue to give white. product group and package data ? product group: led ? package: smd plcc-2 ? product series: standard ? angle of half intensity: 60 applications ? camera flash light ? signal and symbol luminaire ? marker lights ? interior and exterior automotive lighting: brake lights, turn lights, backlighting, side markers ? indicator lighting ** please see document ?vishay material category policy?: www.vishay.com/doc?99902 parts table part color, luminous intensity chromaticity coordinates technology VLMW41s1t2-jkpl-08 white, i v = (180 to 450) mcd x/y typ.: 0.33/0.33 ingan/sapphire and tag VLMW41s1t2-jkpl-18 white, i v = (180 to 450) mcd x/y typ.: 0.33/0.33 ingan/sapphire and tag VLMW41s1t2-jkkl-08 white, i v = (180 to 450) mcd x/y typ.: 0.30/0.28 ingan/sapphire and tag VLMW41s1t2-kkll-08 white, i v = (180 to 450) mcd x/y typ.: 0.31/0.30 ingan/sapphire and tag VLMW41s1t2-lkml-08 white, i v = (180 to 450) mcd x/y typ.: 0.32/0.31 ingan/sapphire and tag VLMW41s1t2-lkml-18 white, i v = (180 to 450) mcd x/y typ.: 0.32/0.31 ingan/sapphire and tag VLMW41s1t2-mknl-08 white, i v = (180 to 450) mcd x/y typ.: 0.33/0.33 ingan/sapphire and tag VLMW41s1t2-nkol-08 white, i v = (180 to 450) mcd x/y typ.: 0.34/0.34 ingan/sapphire and tag VLMW41s1t2-okpl-08 white, i v = (180 to 450) mcd x/y typ.: 0.35/0.36 ingan/sapphire and tag www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com 2 document number 82411 rev. 1.1, 01-aug-11 vishay semiconductors VLMW41....-.... for technical support, please contact: led@vishay.com this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note: not designed for reverse operation note: luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the above type numbers represent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). in order to ensure avail ability, single brightne ss groups are not be orderable. in a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. in order to ensure availability, single wavelength groups are not be orderable. absolute maximum ratings (t amb = 25 c, unless otherwise specified) VLMW41.. parameter test condition symbol value unit dc forward current t amb ? 80 c i f 20 ma surge forward current t p ? 10 s i fsm 0.1 a power dissipation p v 84 mw junction temperature t j 110 c storage temperature range t stg - 40 to + 100 c operating temperature range t amb - 40 to + 100 c thermal resistance junction/ ambient mounted on pc board (pad size > 16 mm 2 ) r thja 360 k/w optical and electrical characteristics (t amb = 25 c, unless otherwise specified) VLMW41.., white parameter test condition part symbol min. typ. max. unit luminous intensity i f = 10 ma VLMW41s1t2 i v 180 450 mcd chromaticity coordinates acc. to cie 1931 i f = 10 ma VLMW41s1t2-jkpl x/y 0.33/0.33 VLMW41s1t2-jkkl 0.30/0.28 VLMW41s1t2-kkll 0.31/0.30 VLMW41s1t2-lkml 0.32/0.31 VLMW41s1t2-mknl 0.33/0.33 VLMW41s1t2-nkol 0.34/0.34 VLMW41s1t2-okpl 0.35/0.36 angle of half intensity i f = 10 ma ? 60 deg forward voltage i f = 20 ma v f 2.7 3.3 4.2 v temperature coefficient of v f i f = 10 ma tc vf - 3 mv/k temperature coefficient of i v i f = 10 ma tc iv - 0.4 %/k luminous intensity classification group light intensity (mcd) standard optional min. max. s 1 180 224 2 224 280 t 1 280 355 2 355 450 crossing table vishay osram VLMW41.. lwt67c.. www.datasheet.co.kr datasheet pdf - http://www..net/
document number 82411 rev. 1.1, 01-aug-11 www.vishay.com 3 vishay semiconductors VLMW41....-.... for technical support, please contact: led@vishay.com this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note: chromaticity coordinate groups are tested at a current pulse durat ion of 25 ms and a tolerance of 0.01. typical characteristics (t amb = 25 c, unless otherwise specified) chromaticity coordinated groups for white smd led xy xy jk 0.2960 0.2590 ml 0.3189 0.3302 0.2910 0.2680 0.3288 0.3452 0.3005 0.2825 0.3288 0.3282 0.3045 0.2715 0.3197 0.3131 jl 0.2910 0.2680 nk 0.3288 0.3081 0.2850 0.2790 0.3288 0.3282 0.2960 0.2955 0.3386 0.3426 0.3005 0.2825 0.3386 0.3235 kk 0.3045 0.2715 nl 0.3288 0.3282 0.3005 0.2825 0.3288 0.3453 0.3100 0.2970 0.3386 0.3591 0.3130 0.2840 0.3386 0.3426 kl 0.3005 0.2825 ok 0.3386 0.3235 0.2960 0.2955 0.3386 0.3426 0.3070 0.3120 0.3484 0.3571 0.3100 0.2970 0.3484 0.3388 lk 0.3100 0.2970 ol 0.3386 0.3426 0.3197 0.3131 0.3386 0.3591 0.3205 0.2956 0.3484 0.3730 0.3130 0.2840 0.3484 0.3571 ll 0.3070 0.3120 pk 0.3484 0.3388 0.3189 0.3302 0.3484 0.3571 0.3197 0.3131 0.3582 0.3715 0.3100 0.2970 0.3582 0.3542 mk 0.3197 0.3131 pl 0.3484 0.3571 0.3288 0.3282 0.3484 0.3730 0.3288 0.3081 0.3582 0.3792 0.3205 0.2956 0.3582 0.3715 figure 1. forward current vs. ambient temperature 0 10 20 30 0 204060 8 0100 t am b - am b ient temperat u re (c) 20913 i f - for w ard c u rrent (ma) 120 figure 2. rel. luminous intensity vs. angular displacement 0.4 0.2 0 95 10319 0.6 0.9 0. 8 0 30 10 20 40 50 60 70 8 0 0.7 1.0 i v rel - relati v e l u mino u s intensity ? - ang u lar displacement www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com 4 document number 82411 rev. 1.1, 01-aug-11 vishay semiconductors VLMW41....-.... for technical support, please contact: led@vishay.com this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 figure 3. relative intensity vs. wavelength figure 4. forward current vs. forward voltage figure 5. relative luminous intensity vs. forward current 0 10 20 30 40 50 60 70 8 0 90 100 400 450 500 550 600 650 700 750 8 00 - w a v elength (nm) 16196 i rel - relati v e intensity 1 10 100 2.5 3.0 3.5 4.0 4.5 v f - for w ard v oltage ( v ) 20217 i f - for w ard c u rrent (ma) 0.01 0.1 1 10 1 10 100 i f - for w ard c u rrent (ma) 20219 i v rel - relati v e l u mino u s intensity figure 6. chromaticity coordi nate shift vs. forward current figure 7. rel. luminous intensity vs. ambient temperature figure 8. forward voltage vs. ambient temperature 0.250 0.275 0.300 0.325 0.350 20220 f - chromaticity coordinate shift (x,y) i f - for w ard c u rrent (ma) 050 40 30 20 10 x y 20914 i v rel - relati v e l u mino u s intensity t am b - am b ient temperat u re (c) 0.5 0.6 0.7 0. 8 0.9 1 1.1 1.2 1.3 1.4 1.5 - 40 - 20 0 20 40 60 8 0 100 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 - 40 - 20 0 20 40 60 8 0 100 v f - for w ard v oltage ( v ) 20915 t am b - am b ient temperat u re (c) www.datasheet.co.kr datasheet pdf - http://www..net/
document number 82411 rev. 1.1, 01-aug-11 www.vishay.com 5 vishay semiconductors VLMW41....-.... for technical support, please contact: led@vishay.com this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters figure 9. coordinates of colorgroups 0.27 0.29 0.31 0.33 0.35 0.37 0.39 0.37 0.29 0.27 0.25 x-coordinates y-coordinates 197 8 4_4 0.35 0.33 0.31 lk pl pk ol ok nl nk ml mk ll kl kk jl jk 22174 mounting pad layout 1.2 2.6 (2. 8 ) 1.6 (1.9) 4 4 area co v ered w ith solder resist 3.5 0.2 3 + 0.15 1.75 0.1 0.9 2. 8 0.15 ca pin identification 2.2 ? 2.4 technical dra w ings according to di n specifications dra w ing- n o.: 6.541-50 8 9.01-4 iss u e: 1; 10.06.10 protection diode a c 20242 www.datasheet.co.kr datasheet pdf - http://www..net/
www.vishay.com 6 document number 82411 rev. 1.1, 01-aug-11 vishay semiconductors VLMW41....-.... for technical support, please contact: led@vishay.com this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 method of taping/polarity and tape and reel smd led (vlm.3.../.4... - series) vishay?s leds in smd packages are available in an antistatic 8 mm blister tape (in accordance with din iec 40 (co) 564) for automatic component insertion. the blister ta pe is a plastic strip with impressed component cavities, covered by a top tape. taping of vlm.3.../.4... reel package dimension in millimeters for smd leds, tape option gs08 (= 1500 pcs.) reel package dimension in millimeters for smd leds, tape option gs18 (= 8000 pcs.) preferred soldering profile figure 10. tape dimensions in mm for plcc-2 figure 11. reel dimensions - gs08 adhesi v e tape component ca v ity blister tape 94 8 670 1. 8 5 1.65 4.0 3.6 3.6 3.4 2.05 1.95 1.6 1.4 4.1 3.9 4.1 3.9 5.75 5.25 8 .3 7.7 3.5 3.1 2.2 2.0 0.25 94 8 66 8 1 8 0 17 8 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 14.4 max. 10.0 9.0 120 94 8 665 identification la b el: v ishay type gro u p tape code prod u ction code qu antity figure 12. reel dimensions - gs18 figure 13. vishay lead (pb)-fr ee reflow soldering profile (acc. to j-std-020) figure 14. double wave soldering of opto devices (all packages) 321 329 identification 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 14.4 max. 10.4 8 .4 120 1 88 57 la b el: v ishay type gro u p tape code prod u ction code qu antity 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperat u re (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp u p 3 c/s max. ramp do w n 6 c/s 19 88 5 ir reflo w soldering profile for lead (p b )-free soldering preconditioning acc. to jedec le v el 2a max. 2 cycles allo w ed 255 c 235 c to 260 c 2 k/s ca. 200 k/s second w a v e first w a v e 5 s f u ll line: typical dotted line: process limits time (s) temperat u re (c) lead temperat u re 300 250 200 150 100 50 0 0 50 100 150 200 250 94 8 626-1 tt w soldering (acc. to cecc00 8 02) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s www.datasheet.co.kr datasheet pdf - http://www..net/
vishay semiconductors VLMW41....-.... document number 82411 rev. 1.1, 01-aug-11 www.vishay.com 7 for technical support, please contact: led@vishay.com this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label example: a) type of component b) manufacturing plant c) sel - selectio n code (bin): e.g.: r1 = code for luminous intensity group 5l = code for chrom. coordinate group d) date code year/week e) day code (e.g. 4: thursday) f) batch no. g) total quantity h) company code dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed into a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity ? 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorp tion, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or 96 h at 60 c + 5 c and < 5 % rh for all device containers or 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd 22-a112 level 2a label is included on all dry bags. example of jesd22-a112 level 2a label esd precaution proper storage and handling procedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning labels are on the packaging. vishay semiconductors standard bar code labels the vishay semiconductors standard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. 106 37 v ishay a h bc d e f g 20216 al u min u m b ag la b el reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 197 8 6 www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
